Forefoot posting is the wedge of material under the forefoot of the orthotic that compensates for forefoot varus or valgus. There are two ways to build it: intrinsic (inside the shell geometry) or extrinsic (a separate wedge added underneath). Both work. 3D printing has changed which one we default to.

Intrinsic posting: inside the shell

The post is built into the shape of the shell itself — the medial forefoot is angled relative to the rearfoot, with no separate wedge. Pros: nothing to delaminate, lower profile, fits in slim shoes. Cons: with milled EVA, intrinsic posting is hard to make stiff enough at moderate angles. EVA flexes, and the post softens within months.

Extrinsic posting: glued underneath

A wedge of crepe, EVA or nylon is bonded to the underside of the shell. Pros: easy to grind down, easy to modify chairside, very stiff posting. Cons: bulkier, potential for delamination at the bond line, sharp edge against the shoe insole.

What 3D printing changes

In MJF PA12 nylon, intrinsic posting is fully effective. The shell does not flex the way EVA does, so a built-in 4° post stays at 4° forever. Internal lattice density can be increased under the post to make it stiffer than the surrounding shell — something EVA cannot do. For most prescriptions, intrinsic posting in 3D printed nylon now gives the biomechanical effect of extrinsic posting in milled EVA, without the bulk.

How much posting

  • 2°: Mild compensation, often added to runners’ scripts as a default for slight forefoot varus.
  • 4°: The standard. Most adult forefoot varus presentations.
  • 6°: Strong correction. Use when forefoot varus is >7° on biomechanical assessment.
  • Forefoot valgus: Reverse the wedge — lateral high, medial low. Common in cavus feet, peroneal weakness.

Where to specify

On the prescription form, specify the angle, side (medial/lateral) and whether intrinsic or extrinsic. For 3D printed shells we default to intrinsic unless specified otherwise. For milled EVA we default to extrinsic.

Practical prescribing

If the patient has a clear forefoot varus on biomechanical exam, post at 2° below the measured varus angle (so 6° measured = 4° post). Avoid posting if the patient has a stiff forefoot or a fixed plantarflexed first ray — you will create a pivot point. Contact the lab if you want a video review of an unusual presentation before prescribing.